VPN L2TP/PPTP Page
Configure L2TP and PPTP server options.
PPP Address Range
10 • VPN Pages
Specify the starting and ending IP address range so that when
the tunnel is set up, the client and server side get their IP
address from this specified range.
Enable or disable Microsoft Point to Point Encryption (MPPE). is
a type of link encryption, meaning that data sent along this tunnel
is encrypted, used in PPTP.
Authenticates the tunnel that was created between the client and
Enter a user password for authentication.
Enter the password again for confirmation.
Authenticates the Layer 2 Tunneling Protocol (L2TP) server.