Software License, Warranty, Safety, and Regulatory Information
SAFETY AND REGULATORY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS — when using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of fire, electric shock, and injury to
persons, including the following:
Read all of the instructions listed here and/or in the user manual before you operate this
device. Give particular attention to all safety precautions. Retain the instructions for future
This device must be installed and used in strict accordance with manufacturer's instructions
as described in the user documentation that is included with the device.
Comply with all warning and caution statements in the instructions. Observe all warning and
caution symbols that are affixed to this device.
To prevent fire or shock hazard, do not expose this device to rain or moisture. The device
must not be exposed to dripping or splashing. Do not place objects filled with liquids, such
as vases, on the device.
This device was qualified under test conditions that included the use of the supplied cables
between systems components. To ensure regulatory and safety compliance, use only the
provided power and interface cables and install them properly.
Different types of cord sets may be used for connections to the main supply circuit. Use
only a main line cord that complies with all applicable device safety requirements of the
country of use.
Installation of this device must be in accordance with national wiring codes and conform to
Operate this device only from the type of power source indicated on the device's marking
label. If you are not sure of the type of power supplied to your home, consult your dealer or
local power company.
Wireless Voice Gateway