Reverse Idler Gear Bushing - Jeep Wrangler 1997 Manual

Hide thumbs Also See for Wrangler 1997:

Table of Contents

CLEANING AND INSPECTION (Continued)

Check the condition of the reverse idler gear bush-

ing (Fig. 129). Replace the gear if the bushing is

damaged or worn.

Fig. 129 Reverse Idler Gear Bushing

SPECIFICATIONS

Plugs, Access . . . . . . . . . . . . . . . . .19 N·m (14 ft.lbs.)

Bolts, Adapter Housing . . . . . . . . .34 N·m (25 ft.lbs.)

Switch, Back-up Light. . . . . . . . .44 N·m (32.5 ft.lbs.)

Plugs, Drain and Fill . . . . . . . . .44 N·m (32.5 ft.lbs.)

Bolts, Front Bearing Retainer . . . .17 N·m (12 ft.lbs.)

Plugs, Interlock and Detent . . . . . .19 N·m (14 ft.lbs.)

Screws, Propeller

Shaft Clamp . . . . . . . .16–23 N·m (140–200 in.lbs.)

Bolts, Rear Mount to

Transmission . . . . . . . . .33–60 N·m (24–44 ft.lbs.)

Nut, Rear Mount Clevis . . .54–75 N·m (40–55 ft.lbs.)

Nuts, Rear Mount to

Crossmember . . . . . . . . .33–49 N·m (24–36 ft.lbs.)

Pins, Restrictor . . . . . . . . . . . . . .27.4 N·m (20 ft.lbs.)

Bolts, Reverse Shift Arm

Bracket . . . . . . . . . . . . . . . . . . .18 N·m (13 ft.lbs.)

Screw, Shift Arm Set . . . . . . . . . . .38 N·m (28 ft.lbs.)

Screws, Shift Fork Set . . . . . . . . . .20 N·m (15 ft.lbs.)

Nut, Shift Knob . . . . . . . . .20–34 N·m (15–25 ft.lbs.)

Screws, Shifter Floor

Cover . . . . . . . . . . . . . . . . .2–3 N·m (17–30 in.lbs.)

Bolts, Shift Tower . . . . . . . . . . . . .18 N·m (13 ft.lbs.)

Nuts, Transfer Case Mounting. . . .30–41 N·m (22–30

TRANSMISSION AND TRANSFER CASE

SPECIAL TOOLS

C-3339 Dial Indicator Set

C-4171 Handle, Universal Tool

8209 Installer, Seal

8212 Installer, Seal

Troubleshooting