TJ
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 116 Remove 3–4 Synchronizer Snap Ring
Fig. 117 Remove 3–4 Synchronizer And Third Gear
(6) Position the 3–4 synchronizer onto the output
shaft.
(7) Using Adapter 6761 and a shop press, press
the 3–4 synchronizer onto the output shaft.
TRANSMISSION AND TRANSFER CASE
Fig. 118 Synchronizer Identification
(8) Select the thickest snap-ring that will fit into
the snap-ring groove of the output shaft (Fig. 119).
Fig. 119 Select 3–4 Synchronizer Snap-ring
(9) Install snap-ring to hold 3–4 synchronizer onto
output shaft.
21 - 69