Install Countershaft Fifth Gear Bearings; Install Countershaft Fifth Gear Assembly - Jeep Wrangler 1997 Manual

Hide thumbs Also See for Wrangler 1997:

Table of Contents

DISASSEMBLY AND ASSEMBLY (Continued)

Fig. 95 Install Fifth Gear Thrust Ring Lock Ball

(27) Install fifth gear thrust ring onto countershaft

and over lock ball (Fig. 96).

(28) Install countershaft fifth gear bearing halves

into countershaft fifth gear assembly (Fig. 97).

Fig. 96 Install Fifth Gear Thrust Ring

Fig. 97 Install Countershaft Fifth Gear Bearings

TRANSMISSION AND TRANSFER CASE

(29) Install countershaft fifth gear assembly onto

countershaft (Fig. 98).

(30) Install fifth gear synchronizer ring (Fig. 99).

Fig. 98 Install Countershaft Fifth Gear Assembly

Fig. 99 Install Fifth Gear Synchronizer Ring

(31) Position fifth gear blocker ring onto counter-

shaft. Verify that blocker ring and countershaft

splines are aligned.

(32) Using a suitable driver and mallet, seat the

blocker ring onto the countershaft.

(33) Select the thickest snap-ring the will fit into

the snap–ring groove of the countershaft.

Troubleshooting