Table of Contents
Advertisement
TJ
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 27 Sector Bushing And O-Ring Removal
MAINSHAFT DISASSEMBLY
(1) Remove mode hub retaining ring with heavy
duty snap-ring pliers (Fig. 28).
(2) Slide mode hub off mainshaft (Fig. 29).
(3) Slide drive sprocket off mainshaft (Fig. 30).
Fig. 28 Mode Hub Retaining Ring Removal
INPUT GEAR AND LOW RANGE GEAR REMOVAL
(1) Remove front bearing retainer attaching bolts
(Fig. 31).
(2) Remove front bearing retainer. Pry retainer
loose with pry tool positioned in slots at each end of
retainer (Fig. 32).
(3) Remove front bearing retainer seal. Tap seal
out with drift and hammer.
(4) Remove input gear retaining ring with heavy
duty snap-ring pliers (Fig. 33)
TRANSMISSION AND TRANSFER CASE
Fig. 29 Mode Hub Removal
Fig. 30 Drive Sprocket Removal
Fig. 31 Front Bearing Retainer Bolts
21 - 177
Advertisement
Table of Contents
Troubleshooting
