TJ
DISASSEMBLY AND ASSEMBLY (Continued)
SHIFT MECHANISM AND GEARTRAIN
DISASSEMBLY
(1) Install suitable bolts and washers in intermedi-
ate plate (Fig. 49). Then clamp plate and gear assem-
bly in vise. Use enough washers to prevent bolts
from touching. Also be sure vise jaws are clamped on
bolt heads.
Fig. 49 Positioning Intermediate Plate In Vise
(2) Remove countershaft fifth gear retaining snap-
ring (Fig. 50).
Fig. 50 Remove Fifth Gear Snap-ring
TRANSMISSION AND TRANSFER CASE
(3) Remove bolt holding fifth gear shift fork to
shift rail (Fig. 51).
Fig. 51 Remove Shift Fork Retainer Bolt
(4) Remove fifth gear blocker ring from counter-
shaft assembly with Puller L-4407 (Fig. 52).
Fig. 52 Remove Fifth Gear Blocker Ring
21 - 15