Jeep Wrangler 1997 Manual page 1023

TJ
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 76 Separating Front Clutch From Rear Clutch
Fig. 77 Output Shaft Thrust Plate and Washer
(24) Remove governor body and park gear from
output shaft.
(25) Remove output shaft and planetary geartrain
as assembly (Fig. 79). Support geartrain with both
hands during removal. Do not allow machined sur-
faces on output shaft to become nicked or scratched.
(26) Loosen rear band adjusting screw 4-5 turns
(Fig. 80).
TRANSMISSION AND TRANSFER CASE
Fig. 78 Front Band
Fig. 79 Planetary Geartrain
(27) Remove snap ring that secures low-reverse
drum to rear support hub, however do not remove
drum (Fig. 81).
(28) Remove bolts attaching rear support to trans-
mission case and pull support from low-reverse drum
(Fig. 82).
(29) Remove bolts attaching overrunning clutch
cam and low-reverse drum to transmission case (Fig.
83).
21 - 117