Locking Keys And Switches - Yaesu FT2DR Operating Instructions Manual

5
Rotate the DIAL to select the desired mode.
It is recommended that AUTO be selected for normal
operation.
Display
AUTO The optimal mode is automatically selected according
to the frequency band.
NFM Only the selected band is switched to the NFM (FM
mode).
AM Only the selected band is switched to the AM mode.
6
Press .
Set mode will be canceled.
Tip
Even if AM mode is selected on a ham radio band, 144 MHz band or 430 MHz band, transmission will
continue to be in the FM mode.
Caution
The mode of the A-band AM/FM broadcast radio bands cannot be changed.

Locking Keys and Switches

To prevent accidental frequency change during operation, the keys, switches and DIAL
(except , , , and
1
Press .
[LOCK] is displayed for 1 second on the LCD.
When the lock function is activated,
the LCD.
Remark To unlock a key or switch, press
[UNLOCK] is displayed on the LCD for 1 second.
Tip
To lock/unlock the operations of the DIAL and
mode, then select [CONFIG] → [9 LOCK].
Operation
) can be locked.
always appears on
again.
, press the
Miscellaneous Settings
key for over one second to enter Set
49