Using The Memory; A Wide Variety Of Memory Functions - Yaesu FT2DR Operating Instructions Manual

A Wide Variety of Memory Functions

The FT2DR/DE transceiver incorporates the following types of memory channels in
addition to the regular memory channels (numbers 001 to 900).
• [Home channels] which can be recalled on each frequency band just by touching a key
( see page 57)
• Preset Receiver Memory Channels include the International VHF marine radio (57
channels) and Worldwide Wide Broadcasts (89 channels) (
• 99 (901 to 999) skip search memory channels that allow skipping unwanted frequencies
during VFO scanning (
• 50 sets of memory channels (L1/U1 to L50/U50) for programmable memory channel
scanning (PMS) (
The operating frequency and other operational information can be registered to each
regular memory channel, home channel, or PMS memory channel:
• Operating frequency
• Tone information
• Transmitter output
(The analog/digital operating mode is not registered to the memory channel)
Memory channels can be sorted and registered into memory banks according to the
intended use. The transceiver allows you to use 24 types of memory banks. A maximum of
100 memory channels can be registered in each memory bank. A name can be assigned
to each memory bank with up to 16 characters. (
Memory channels
(900 channels)
Home channels
(11 channels)
Memory banks
(24 banks)
Up to 100 memory channels can be
registered to each bank.
54

Using the Memory

see page 72)
see page 81)
• Memory tag
• DCS information
Memory Channel Configuration of the Transceiver
Skip search memory channels
• Repeater information
• Memory channel skip information
see page 64)
(99 channels)
Preset receiver memory channels
• Memory channels for short wave broadcasts
(89 channels) and international VHF (marine)
radios (57 channels)
see page 65)
PMS memory channels
(50 sets)