Download Print this page

Yaesu FT2DR Operating Manual

144/430mhz digital/analog transceiver.
Hide thumbs
   

Advertisement

Application for FCC / IC
FCC ID: K6620605X20
IC: 511B-20605X20
FT2DR
144/430MHz
DIGITAL/ANALOG
TRANSCEIVER
Operating Manual
C4FM FDMA
Before Using the Transceiver
Preparation
Basic Operation
Using the Memory
Appendix

Advertisement

   Related Manuals for Yaesu FT2DR

   Summary of Contents for Yaesu FT2DR

  • Page 1

    Application for FCC / IC FCC ID: K6620605X20 IC: 511B-20605X20 FT2DR 144/430MHz DIGITAL/ANALOG TRANSCEIVER Operating Manual C4FM FDMA Before Using the Transceiver Preparation Basic Operation Using the Memory Appendix...

  • Page 2

    Compatible with microSD memory cards ��������������������������������������������������������������������xx m Snapshot function (an optional camera microphone MH-85A11U is required) ����������xx * WIRES-X, GM function and APRS instruction manuals are not included in the product package� They are available and may be downloaded from the Yaesu�com website�...

  • Page 3: How To Read This Manual

    Application for FCC / IC FCC ID: K6620605X20 IC: 511B-20605X20 Introduction Using the Touch Screen y Caution when Using the Touch Screen You can perform various function operations simply by gently touching the LCD touch screen� m Applying a LCD protective film to the touch screen may impact the ability of the touch screen to function properly�...

  • Page 4

    Application for FCC / IC FCC ID: K6620605X20 IC: 511B-20605X20 Safety Precautions (Be Sure to Read) Be sure to read the safety precautions to use this product safely. We are not liable for failures and other problems caused due to misuse or use of this product by you or a third party as well as the damages caused through use of this product by you or a third party except in the case where we are ordered to pay for damages under the laws�...

  • Page 5

    Do not make very long Do not use any battery charger transmissions. which is not specified by Yaesu. The main body of the transceiver may A fire or failure can result� overheat, resulting in a failure or burns�...

  • Page 6

    If they are installed improperly, the Do not place this transceiver in a FT2DR may fall or drop, resulting in an place subject to direct sunlight or injury or damage� near a heater. Do not place a heavy object on the The transceiver can deform or discolor�...

  • Page 7

    Application for FCC / IC FCC ID: K6620605X20 IC: 511B-20605X20 Safety Precautions (Be Sure to Read) Charge the battery pack within the Before discarding the worn battery temperature range from +5 °C to pack, affix tape or the like to its +35 °C (+41 °F to +95 °F).

  • Page 8

    Application for FCC / IC FCC ID: K6620605X20 IC: 511B-20605X20 Safety Precautions (Be Sure to Read) About Waterproofing Feature Conforming to IPX5 When the included antenna and battery pack are installed and the MIC/SP jack, EXT DC IN jack, DATA terminal, and micro SD slot are securely covered with rubber caps, this product is moisture and splash resistant�...

  • Page 9

    Application for FCC / IC FCC ID: K6620605X20 IC: 511B-20605X20 Names and Functions of Controls Transceiver ⑪ ⑫ ① ⑬ ⑳ ② ③ ④ ㉑ ⑤ ⑭ ⑥ ㉒ ⑮ ⑦ ⑯ ⑧ ⑰ ㉓ ⑨ ⑱ ⑩ ⑲ ⑪ VOL ①...

  • Page 10

    • Connect an external power supply adapter with • To use the clone function, connect another a cigarette lighter plug (SDD-13) or an external FT2DR with an optional clone cable (CT-168)� power cable (E-DC-6) to this jack� • When updating the firmware, connect to your •...

Comments to this Manuals

Symbols: 0
Latest comments: