Manually Transmitting The Dtmf Code - Yaesu FT2DR Operating Instructions Manual

Manually Transmitting the DTMF Code

1
Press and hold the
The transceiver enters the Set mode.
2
Touch [SIGNALING].
3
Touch [4 DTMF MODE].
4
Rotate the DIAL to select [MODE], then press the
5
Rotate the DIAL to select [MANUAL].
6
Press .
The transceiver is ready for transmitting the DTMF code manually.
7
Press .
[DTMF] appears on the LCD.
8
While pressing
The numeric keypad appears.
9
Use the numeric keypad to input the DTMF code.
Tips
• The registered DTMF code is transmitted (Refer to the following table).
• The transmitted DTMF sound can be heard from the speaker.
10
Release .
Even after releasing
transmission is completed.
Tip
The DTMF code is a combination of 2 frequencies.
1209Hz
697Hz 1
770Hz 4
852Hz 7
941Hz

key for over one second.
, touch [DTMF].
, the transmission continues until the DTMF signal
1336Hz 1477Hz 1633Hz
2 3
5 6
8 9
0 #
Using the DTMF Function
key.
A
B
C
D
105