Using The Touch Screen; How To Read This Manual - Yaesu FT2DR Operating Instructions Manual

Using the Touch Screen

y Caution when Using the Touch Screen
Observe the following precautions when using the touch screen. Failing to do so may
result in malfunction or damage.
m Operate the touch screen with your fingers. Do not operate with any pointed objects
including your fingernail or pen.
m Do not apply any excessive force to the touch screen.
m Do not scrub or scratch on the touch screen when cleaning it.
y Restrictions on touch operations
m The touch screen does not respond to any of the flicking and pinching-in/out operations.
m Due to the characteristics of the LCD, when the ambient temperature is low, the touch
screen may respond slowly.
y Touch Screen Upkeep
m After turning off the transceiver, wipe the touch screen with a soft dry cloth.
m Do not use water, chemical agents or mild detergents.

How to Read This Manual

Common explanatory expressions used in this manual are as follows:
Press ...................................................... Indicates to simply press a key or switch.
Press and hold
Touch [F MW] .................................................. Indicates briefly touching the screen.
Touch [F MW] for over one second ................ Indicates touching the screen for over
The following notations are also used in this manual.
Caution
Tip
for over one second ....... Indicates to press a key or switch for over
...Explains caution to observe during operation.
...Explains operating suggestions or useful tips.
one second.
one second.
Introduction
7