Adjusting The Volume Level; Toggling The Operating Band - Yaesu FT2DR Operating Instructions Manual

Performing Communication

Adjusting the Volume Level

The transceiver volume levels for the A-band and B-band are adjusted separately.
1
Press key to select the band for which the volume
level is to be adjusted.
Pressing
A-band and B-band.
2
Rotate the VOL knob clockwise/counterclockwise to
adjust the volume level.
The [VOL] gauge moves right/left.
Supplement

Toggling the Operating Band

Normally, both operating bands are displayed on the top
half and bottom half of the transceiver touch screen. This
is Dual band.
With one of the bands selected, change the frequency
and radio operating mode. The selected band (displayed
in black letters) is called Operating band. The other band
(displayed in gray letters) is called Sub-band.
Each time pressing
The desired operating band may also be selected by
touching the frequency display.
Pressing and holding
Mono-band.
For details on how to toggle the display by touching the LCD, see the following illustrations.
34
key each time toggles between the
If no sound is heard from the speaker, press
and then adjust the volume level while listening to
white noise.
key toggles the operating band.
for over one second displays only the operating band, this is