Calling A Specific Station; Receiving "Pager Code" Calls From A Remote Station (Standby Operation); Using The Pager Answer Back - Yaesu FT-4XE Advance Manual

Calling a Specific Station

The "pager code" may be set to call to specific stations.
Press and hold
the Function key
(Entering the Set mode)
1. Press the numeric key to input the first element of the
code from 01 to 50.
• The icon is moved to the second element of the code.
2. Press the numeric key to input the second element of
the code from 01 to 50.
• The first and second element of the code may not be
set to the same code.
• Press the [p] or [q] to switch the icon between first
code and second code.
3. Press the PTT switch to save the setting and return to normal operation.
4. Press the PTT switch to transmit a call to the specific station.

Receiving "pager code" calls from a Remote Station (Standby Operation)

When the Pager function is activated, and a call is received with a corresponding Code,
" PAGING " blinks and the audio is heard.
Furthermore, when the Bell function (
blinks while calling from the other station.

Using the Pager Answer Back

If the Answer Back feature is ON, when called by another station with a corresponding
pager code, the transceiver is automatically placed in the transmit mode (for about 2.5
seconds) to notify the other station that you are ready to communicate.
Press and hold
the Function key
(Entering the Set Mode)
1. Press the [p] or [q] to select the "ABK.ON".
2. Press the PTT switch to save the setting and return to normal operation.
Press the p or q key
→
(Selecting "24 PAG.CDT")
9) is activated, the bell rings and the
Press the p or q key
→
(Selecting "22 PAG.ABK")
8
→
Press the Function key
→
Press the Function key
icon