Specifications - Yaesu FT2DR Operating Instructions Manual

Specifications

y General
Frequency Range (A):
Frequency Range (B):
Frequency Range (A/B):
Channel Steps:
Mode of Emission:
Frequency Stability:
Operating Temperature Range:
Supply Voltage:
Current Consumption (Approx.): RX: 120 mA (Mono Band Receive)
Case Size (W × H × D):
Weight (Approx.):
168
RX: 520 - 1710 kHz, 1.8 - 30 MHz,
30 - 76 MHz (USA version),
30 - 88 MHz (EXP/European version),
76 - 108 MHz (USA version),
88 - 108 MHz (EXP/European version),
108 - 137 MHz, 137 - 174 MHz,
174 - 222 MHz,
222 - 420 MHz,
420 - 774 MHz (USA version),
420 - 800 MHz (EXP/European version),
803 - 999 MHz (Cellular Blocked, USA version),
800 - 999 MHz (EXP/European version)
RX: 108 - 137 MHz, 137 - 174 MHz,
174 - 222 MHz,
222 - 420 MHz, 420 - 470 MHz,
470 - 580 MHz
TX: 144 - 146 MHz or 144 - 148 MHz,
430 - 440 MHz or 430 - 450 MHz
5, 6.25, 8.33, 9, 10, 12.5, 15, 20, 25, 50, 100 kHz
F1D, F2D, F3E, F7W
±2.5 ppm (−20 °C to +60 °C [−4 °F to +140 °F])
−20 °C to +60 °C (−4 °F to +140 °F)
Nominal: 7.2 V DC, Negative Ground SBR-14LI,
Nominal: 7.4 V DC, Negative Ground FNB-101LI,
4 - 14 V DC (Negative Ground (EXP DC JACK)),
11 - 16 V DC (Negative Ground (EXP DC JACK with SDD-13))
180 mA (Dual Band Receive)
80 mA (Mono Band Receive, Standby)
110 mA (Dual Band Receive, Standby)
50 mA (Mono Band Receive, Standby, Saver On "Save Ratio 1:5")
50 mA (Dual Band Receive, Standby, Saver On "Save Ratio 1:5")
+20 mA (Digital)
+20 mA (GPS On)
400 μ A (Auto Power Off)
TX: 1.6 A (5 W TX, 144 MHz 7.2 V DC)
1.8 A (5 W TX, 430 MHz 7.2 V DC)
62 × 110 × 32.5 mm (2.4" × 4.3" × 1.3")
(with SBR-14LI, w/o knob, antenna & belt clip)
62 × 110 × 27 mm (2.4" × 4.3" × 1.1")
(w/o SBR-14LI, knob, antenna & belt clip)
310 g (10.93 oz) (with SBR-14LI & Antenna)