Set Mode: SD CARD Menu Operations
Press and hold the
[SD CARD] to set the individual items.
After completing the setup, press
Saving/Loading Data to/from microSD Memory Card
Settings information can be saved to a microSD memory card, also the saved information
can be loaded to the transceiver.
Rotate the DIAL, then touch [1 BACKUP].
Rotate the DIAL to select the operation to be performed.
Write to SD
Read from SD
A pop-up window appears on the LCD.
Touch [OK] again.
When [Write to SD] is selected and data writing completes, a beep sounds and
"COMPLETED" appears on the LCD.
When [Read from SD] is selected and data reading completes, a beep sounds, then
the transceiver restarts with the settings read from the microSD memory card applied.
key for over one second to display "SETUP MENU", then touch
to exit from Set mode.
Saves the transceiver setting information to a microSD memory
Loads the information to the transceiver from a microSD memory