Attaching A Hand Strap - Yaesu FT2DR Operating Instructions Manual

Attaching a Hand Strap

If you attach a hand strap to the transceiver, insert its 1 mm diameter string through the
strap hole of the transceiver and thread the strap through the loop to secure it to the
transceiver.
* The hand strap is not supplied.
1
Remove the battery pack.
2
Attach the hand strap.
Caution
Use a hand strap which can withstand the weight of the
transceiver. If you use a hand strap which is not strong enough,
the hand strap can break and the transceiver may fall down,
causing injury, breakage and other troubles.
Attaching the Supplied Accessories
21