Reports; Setting The Reports Options - Xerox Versant 2100 Press System Administration Manual

Common Service Settings
1. Press the Tools button on the press Control Panel.
2. Select the Tools icon on the screen.
3. Select System Settings > Common Service Settings.
4. Select Paper Tray Settings. Use the down scroll button to view the second page of
the screen.
5. Select Auto Tray Switching Control.
6. Select the tray listed that you want to enable or disable for automatic tray switching
(Tray 1, for example) and Change Settings.
7. Select Enable or Disable.
8. Repeat the previous step for each tray you want using or not using this feature.
9. Select Save.
10. Select Close twice to return to the main Tools screen.

Reports

As the system administrator, use this Reports feature from the Tools area to control and
configure reporting such as how reports will print and whether to allow the operator to
print reports. Options include:
Print Reports Button
When this option is enabled, the Print Reports button appears on the Machine
Information tab.
Job History Report
Select On or Off. When On, and you select Print Report, the press automatically prints
a Job History Report of the highlighted job.
2 Sided Report
Select this option to automatically have a report print 1-sided or 2-sided.
Report Output Tray
Select this option to set the output tray to automatically use for the printed report.
Note
Reports that both the operator and system administrator can produce and print are
available from the Machine Status area of the press and are described in the Press User
Guide.

Setting the Reports options

1. Log in as the administrator.
2. Press the Tools button on the press Control Panel.
3. Select the Tools icon.
4. Select System Settings > Common Service Settings.
6-14 Xerox ® Versant 2100 Press
System Administration Guide