Xerox Versant 2100 Press System Administration Manual page 74

Common Service Settings
Table 1. Default Paper Width NVM Settings at Initial Installation
Range NVM Chain Link Number
Number
Fuser 501 - 860 (lower limit range)
Module
1
501 - 857 (upper limit range)
Fuser 501 - 861 (lower limit range)
Module
2
501 - 858 (upper limit range)
Fuser 501 - 862 (lower limit range)
Module
3
501 - 859 (upper limit range)
Note
The following shows typical workflow examples of width sizes you may use and what
NVM settings you would select to calibrate the NVMs. Any ranges can be used. Each
value is calculated with + / - 5mm.
Table 2. Examples of Custom Paper Width Settings and their NVM Values
Range NVM Chain Link Number
Number
1, 2 or 3 If range 2 is selected: 501 -
In this ex- 861 (lower limit range)
ample,
Range 2
501 - 858 (upper limit
range)
1, 2 or 3 If range 3 is selected: 501 -
In this ex- 862 (lower limit range)
ample,
Range 3
501 - 859 (upper limit
range)
9. Select the Save button.
The NVM Read/Write window displays the entered value as the Current Value.
10. Select Close to save your new setting and return to the Tools window.
A "Reboot Machine" message displays.
6-18
Media Size Paper Width (lower
/ upper limit)
All widths al- 98.0 - 330.2 mm
lowed
98.0 - 330.2 mm
A3 SEF / A4 (XE); 180.0 - 249.9 mm
Letter LEF /
11x17 (XC)
270.4 - 298.0 mm
SRA3 (XE); 12 / 300.0 - 310.0 mm
13 inches (XC)
307.0 - 330.2 mm
Media Size Paper Width
(lower /upper
limit)
8 x 10 inches lower > 249 mm
(width is 10 in.)
upper > 259 mm
12 x 18 inches lower >
(width is 12 in.) 299.8mm
upper >
309.8mm
NVM De-
fault Value
980 - 3302
980 - 3302
1800 - 2499
2704 - 2980
3000 - 3100
3070 - 3302
NVM Default
Value
(12in.=304.8mm)
(10in.=254mm)
2490
2590
2998
3098
Xerox ® Versant 2100 Press
System Administration Guide