Authentication; Login Type; Selecting The Login Type - Xerox Versant 2100 Press System Administration Manual

Hide thumbs Also See for Versant 2100 Press:
Table of Contents

Advertisement

Authentication/Security Settings
Set the password AFTER setting the system administrator login ID. The passcode must
be 4-12 characters.
1. Log in as the administrator.
2. Press the Tools button on the Control Panel.
3. Select the Tools icon on the screen.
4. Select Authentication/Security Settings > System Administrator Settings > System
Administrator s Passcode.
5. Type the new password from 4-12 numeric digits in the New Passcode field.
6. Select Save.
Note
To set no passcode, leave the passcode blank, and select Save.
7. In the Type Passcode field, retype the same password.
8. Select Save.
9. Exit the administrator mode.

Authentication

Use the Authentication menu options to setup the login, access control and user
accounts.

Login Type

When a Login Type is selected, users are required to log into their accounts before
accessing the print services. The availability of the service is determined by press
configuration and system administrator settings. The Login Type can be changed at
any time to fit your needs.
The following options are available:
No Login Required
The user does not require a login to access the print services.
Login to Local Accounts
This is the direct operation of the press from the Control Panel. The system administrator
sets the Login Type, and the users are thereafter required to log into their accounts
before print services can be accessed. Also, the print data is received after being
authenticated by cross-checking the authentication information that was pre-configured
on a client s print driver with the one registered on the press.

Selecting the Login Type

1. Log in as the administrator.
2. Press the Tools button on the Control Panel.
8-4
Xerox
®
Versant 2100 Press
System Administration Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents