Using Centreware® Internet Services; Configuration Of The Press - Xerox Versant 2100 Press System Administration Manual

Using CentreWare®
Internet Services
®
CentreWare Internet Services is the HTTP server application installed with your system
that allows system administrators to manage network and system settings for the press
from their computer workstation. Together with the network administrator, the system
administrator can configure and manage the press remotely.
From a web browser on any networked computer or the print server, you can view and
modify many of the same feature settings found at the press Control Panel.

Configuration of the Press

Most configuration settings are located from the Properties tab in CentreWare Internet
Services software.
By default, the press is configured to retrieve the IP Address and other network
information automatically from the print server.
Before using CentreWare Internet Services, make sure that the HTTP Protocol and all
ports are enabled at the press. The press must be powered on.
1. Enter the System Administrator mode.
2. Ensure that the HTTP Protocol and all ports are enabled at the press.
a) Select System Settings.
b) Select Connectivity & Network Setup.
c) Select Port Settings.
d) Select Internet Services (HTTP) and then select Change Settings.
e) Select Port Status and select Change Settings.
f) Select Enabled and then select Save.
g) Select Close repeatedly until the Connectivity & Network Setup screen is displayed.
Xerox ® Versant 2100 Press
System Administration Guide
3
3-1