Smart Esolutions Setup (Remote Services) - Xerox Versant 2100 Press System Administration Manual

Using CentreWare® Internet Services
Specify Email Recipients and Status Alerts
1. In the Recipient s Email Address fields, you can enter the email address of up to three
different recipients to receive notifications. In the Send Notice field, enable the
notification to be immediate or at a regular interval. To disable notification, select
Off.
2. In the Mail Notice Status Settings area, for each Recipient column you have an email
address, check the status on which you want a notification to be sent.
3. For Notice Frequency Settings, select how often (the regular interval) you want the
notification sent such as daily or monthly, the day of the week or month, and the
exact time of the day.
4. Select Apply to save the settings.

SMart eSolutions Setup (Remote Services)

From the CentreWare Internet Services main screen, select the Properties tab. In the
Properties panel shown at the left of the screen, select General Setup and SMart
eSolutions Setup.
Use this area for configuring or enabling the proxy server setup for Remote Services.
You can also set up email notification addresses and view the meter read and supplies
data that was last sent to Xerox. Use Maintenance Assistant to immediately transmit
system data to Xerox for diagnostic support.
Note
You can disable or enable Xerox Remote Print Services through the CentreWare Internet
Services web page only; not at the press Control Panel. The settings you select will apply
and be visible on the press.
Configure the Proxy Server for Remote Services
1. From Smart eSolutions Setup, select Proxy Server.
2. In the General area of the Proxy Server window, make sure the Use Proxy Server
Enabled checkbox is selected.
3. Contact your network administrator for the correct Proxy Setup option to select, the
Addresses to Bypass Proxy Server, the HTTP (or HTTPS) Server port number and name,
and whether Authentication should be enabled.
4. Select Apply to save the settings.
Communication Status
From SMart eSolutions Setup, select Communication Status.
The Configuration Mode for SMart eSolutions (Remote Services) is Enabled as the default
for the press and the last transmission date of meter reads or supplies data is shown.
Email Notification
From SMart eSolutions Setup, select E-mail Notification.
3-6 Xerox ® Versant 2100 Press
System Administration Guide