Xerox Versant 2100 Press System Administration Manual page 26

Using CentreWare® Internet Services
This section describes how to configure settings for SNMP. The SNMP port is enabled
by default.
To Configure SNMP Settings in CentreWare Internet Services:
1. In CentreWare Internet Services, select the Properties tab.
2. Select Connectivity > Port Settings.
3. To enable the SNMP port, select Enabled next to SNMP.
4. From Connectivity > Protocols, select SNMP Configuration.
Note
Another option that exists is called Enable SNMP v3 Properties. If using this option,
configure HTTPS before configuring SNMP v3. Configuring this feature requires secure
web page communications. Also, SSL must be enabled.
5. Under SNMP Properties, select Enable SNMP v1/v2c or v3 Protocols.
6. Select Apply.
7. Under Authentication Failure Generic Traps, select Enabled for the system to
generate a trap for every SNMP request that is received by the press that contains
an invalid community name.
8. Select Apply.
9. To change the SNMP public and private community names from the default values:
a) Under SNMP Properties, select Edit SNMP v1/v2c Properties.
b) Type a name up to 256 characters for the Community Name (Read only),
Community Name (Read/Write), and Trap Community Name (Trap
Notification).
c) Set the System Administrator's Login ID.
d) Reflect the values for the press setting values.
e) Click Apply. A screen to enter the user name and password may display.
f) The right frame on the web browser will change to the reboot display.
Note
The default Login ID value is admin and password is 1111.
g) Click Reboot. The press will reboot and the setting value will be reflected.
Note
Xerox recommends you change the SNMP v1/v2c public and private community
names for security purposes.
Note
Before SNMPv3 can be enabled, a digital certificate must be installed on the press
and SSL/TLS must be enabled.
10. To edit SNMP v3 settings:
a) Under SNMP Properties, select Edit SNMP v3 Properties.
b) Under Administrator Account, select Account Enabled to create the administrator
account.
c) Type an Authentication Password and confirm it. This password is used to generate
a key used for authentication.
3-10 Xerox ® Versant 2100 Press
System Administration Guide