Locating The Press Ip Address; Customizing The Press Screen; Assigning A Feature To The Screens - Xerox Versant 2100 Press System Administration Manual

Locating the Press IP Address

The IP Address of the press is found on the Configuration Report and can be obtained
from the press touch screen. This address, however, is only used to enable
communication/network connectivity between the press and the print server.
To obtain the IP Address of the press:
1. At the press Control Panel, select the Machine Status button.
2. Select the Machine Information tab. The IP Address is listed.
To Access the Press through CentreWare Internet Services:
You will need the print server IP Address to access and use CentreWare Internet Services.
The IP Address assigned at the print server allows you to access the press features and
settings from any computer workstation.

Customizing the Press Screen

The administrator may customize the following features:
• Whether certain screens will display or not on the press touch screen.
• Specify when screens may be displayed such as after the press is switched on or when
it exits the Power Saver mode.
• The brightness of the screens as they are displayed on the press touch screen
• The speed of the scroll buttons alongside the screen
• The default language to be used

Assigning a Feature to the Screens

1. Log in as the administrator.
2. Press the Tools button on the press Control Panel.
3. Select the Tools icon on the screen that displays.
4. Select System Settings > Common Service Settings.
5. Select Screen Settings. From the list, select the feature you want to set or change.
6. Select Change Settings.
7. Select the desired setting for the feature.
8. Select Save.
The previous screen displays.
9. Select Close.
The main Tools screen displays.
Xerox ® Versant 2100 Press
System Administration Guide
System Administrator Overview
1-3