How To Process A Sale With Tip - PC-EFTPOS i5100 Operating Manual

5.6 How to Process a Sale with Tip.

This process is a sale with tip enabled. It is most commonly used by restaurants.
Note:
The Tip feature needs to be enabled on the terminal.
TERMINAL DISPLAY
READY
LOGO
hh:mm
PURCHASE
PRESENT CARD
PURCHASE
SELECT ACCOUNT
CHQ SAV
CREDIT
PIN AND/OR ENTER
DEBIT/CREDIT SALE
PROCESSING
REMOVE CARD
VERIFY SIGNATURE
CORRECT?
PC-EFTPOS i5100 MERCHANT OPERATING GUIDE
PROCEDURE
Set the enable tip flag on the POS and initiate a
transaction.
dd/mm/yy
If presented with a chip card, insert the customer's
$X.XX
card into the chip card reader. Refer to Inserting a
Chip Card in section 4.1.
OR:
If presented with a magnetic stripe card, swipe the
customer's card through the card reader. Refer to
Swiping a Magnetic Stripe Card in section 4.2.
Have the cardholder select their account type.
$X.XX
Note: The terminal will only display the available
accounts for the card entered.
Tips can only be added to transactions where
CR
credit has been selected.
Where prompted, have the cardholder key
$X.XX
in their PIN and press ENTER, or just press
ENTER.
The terminal is connecting to the bank and
processing the transaction.
If a chip card was inserted, remove the card
from the reader.
If signature is required, remove the card from
the terminal: Have the customer sign the
receipt. If the signature matches the signature
on the card, press YES on the POS. Otherwise
press NO.
TRANSACTION PROCEDURES
33