PC-EFTPOS i5100 Operating Manual page 12

To connect the internal modem:
1. Plug the RJ12 phone connector on the curly end of the Y powered curly cord into
the socket marked
2. Plug the opposite end of the RJ12 curly cord into the telephone cable adaptor,
which inserts into the telephone wall socket.
3. Refer to section 8.1 for internal modem configuration.
2.4.2 Argent ISDN Connection.
The Telstra Argent ISDN connection is obtained by applying for this service direct
from Telstra.
The PC-EFTPOS i5100, using a Telstra Argent ISDN connection requires the
installation of a Telstra On Ramp and Telstra Argent Terminal Adaptor (ATA). This is
supplied and installed by Telstra.
Other equipment required:
• Serial cable (DB9 to DB9/DB25) (Note: the required cable is dependant on the
Argent ATA that has been installed and is either supplied by Telstra or you)
10
PC-EFTPOS i5100 MERCHANT OPERATING GUIDE
Base of i5100 terminal
Power
, if it is not already.
RS232-1 RS232-2
GETTING STARTED