Switching Between Standalone Lite Mode And Integrated Mode - PC-EFTPOS i5100 Operating Manual

To exit training mode:
TERMINAL DISPLAY
READY
LOGO
hh:mm
At the end of training mode all transactions will be reset and previous values are
restored to batch and ROC (Record of Charge) number.

4.6 Switching Between Standalone Lite Mode and Integrated Mode.

The terminal can be switched between standalone lite mode and integrated mode.
Standalone lite mode means that the terminal can operate independently of the POS.
Integrated mode means that the terminal operates with the POS.
To enter standalone lite mode:
TERMINAL DISPLAY
READY
LOGO
hh:mm
FUNCTION:
SwITCH TO STANDALONE
MODE?
[ENTER] = YES
[CLEAR] = NO
LOGO
PURC CASH
 
Note: Please refer to section 8.0, for further information about configuring and
using standalone lite mode.
PC-EFTPOS i5100 MERCHANT OPERATING GUIDE
ACTION
Remove the training mode flag on the POS
and the terminal is now ready to process live
transactions again.
dd/mm/yy
ACTION
Press the FUNC key.
dd/mm/yy
Key in 11112222 and press ENTER.
Press the ENTER key for standalone lite mode.
The standalone lite mode idle screen is
RFND
displayed.

19
PROCEDURES