Using PC-EFTPOS with a POS
When PC-EFTPOS is configured to be used with a POS, all the EFTPOS functionality is initiated through
the POS. Consult your POS vendor on the operation of EFTPOS through your POS.
The terminal may be configured to internal communications mode, which offers communications via the
internal GPRS modem. (Set Host Interface / Address in the PC-EFTPOS Client to NPT)
The terminal may be configured to internal print mode (Set Printer in the PC-EFTPOS Client to NPT)
NAB Specific Details
NAB help Desk Number: 1300 369 852
Requires both a terminal ID and merchant ID. The terminal ID is 6 digits and starts with a „B‟.
Letters are always in upper case.(e.g. BA1001). The merchant ID is 8 digits long and is referred to
NAB as the "EB Number".
Terminal Functionality Supported by NAB
EFTPOS Functionality:
Purchase
Cash Out
Refund
MOTO processing
Pre-Authorisation
Completion
Tipping
Training Mode
Balance Enquiry
Voucher Entry
Electronic Fallback (EFB)
EMV processing
Settlement Options
Settlement
Pre-Settlement
Last Settlement
Sub-Totals
Summary Totals
Shift Totals
Hardware Options:
Sagem Eclipse with Internal Printer & GPRS modem
TMS Support:
Via Sagem TMS, Internal GPRS only
Confidential
Page 5
19/02/09