How To Process A Cash Only Transaction - PC-EFTPOS i5100 Operating Manual

5.3 How to Process a Cash Only Transaction.

If 'Cash' is enabled on the terminal, customers can be given cash out. Cash is
available from cheque and savings accounts only.
TERMINAL DISPLAY
READY
LOGO
hh:mm
CASH-OUT
PRESENT CARD
CASH-OUT
SELECT ACCOUNT
CHQ SAV
CHEQUE
PIN AND ENTER
DEBIT CASH
PROCESSING
REMOVE CARD
DEBIT CASH
APPROVED
Before completing the transaction, check that the transaction was approved. Hand
the customer their copy of the transaction record and their card. If the transaction
is declined, the terminal will display an error message giving the reason. An
explanation of the error code is available in section 10.2, Response Codes.
PC-EFTPOS i5100 MERCHANT OPERATING GUIDE
PROCEDURE
Initiate a cash out only transaction from the
POS.
dd/mm/yy
If presented with a chip card, insert the
$X.XX
customer's card into the chip card reader. Refer to
Inserting a Chip Card in section 4.1.
OR:
If presented with a magnetic stripe card, swipe the
customer's card through the card reader. Refer to
Swiping a Magnetic Stripe Card in section 4.2.
$X.XX
Have the cardholder select their account type.
Note: Credit is not an option.
$X.XX
Have the cardholder key in their PIN and press
ENTER.
The terminal is connecting to the bank and
processing the transaction.
If a chip card was inserted, remove the card
from the reader.
This message will be displayed if the transaction
is approved.
TRANSACTION PROCEDURES
27