Purchase Using Standalone Lite Mode - PC-EFTPOS i5100 Operating Manual

8.5 Purchase using Standalone Lite Mode.

TERMINAL DISPLAY
LOGO
PURC CASH
 
PURCHASE AMOUNT?
CASH-OUT AMOUNT?
TOTAL AMOUNT
PURCHASE
PRESENT CARD
PURCHASE
SELECT ACCOUNT
CHQ SAV
CHEQUE
PIN AND/OR ENTER
DEBIT/CREDIT SALE
PROCESSING
PC-EFTPOS i5100 MERCHANT OPERATING GUIDE
ACTION
Press the soft key below PURC.
RFND

Key in the purchase amount and press ENTER.
$X.XX
If 'Purchase with Cash' transactions are enabled
on the terminal, you can enter a cash-out
amount. The cash-out amount may be left at
$X.XX
$0.00. Press ENTER.
If the total amount is correct, press ENTER.
$X.XX
If presented with a chip card, insert the
customer's card into the chip card reader. Refer
to Inserting a Chip Card in section 4.1.
$X.XX
OR:
If presented with a magnetic stripe card, swipe
the customer's card through the card reader.
Refer to Swiping a Magnetic Stripe Card in
section 4.2.
$X.XX
Press the soft key beneath the account type
needed.
CR
Where prompted, have the cardholder key
$X.XX
in their PIN and press ENTER, or just press
ENTER.
Displayed while the transaction is processed
online to the bank. The issuer's name (eg:
MASTERCARD) is displayed on this screen.
STANDALONE LITE MODE
61