PC-EFTPOS i5100 Operating Manual page 76

Connecting the ViVOtech Contactless Card Reader.
The ViVOtech contactless card reader is connected directly to the PC-EFTPOS i5100
terminal using the detachable connecting cable.
The ViVOtech contactless card reader can be connected to a PC-EFTPOS i5100
terminal which is being used in either integrated mode or standalone lite mode.
Connecting to the PC-EFTPOS i5100 Terminal using
Integrated Mode.
a. Remove the cable management clip on the base of the EFTPOS terminal as shown.
Cable Management Clip
b. Refer to section 2.3 Connecting the PC-EFTPOS i5100 Terminal for information
regarding installation and connection of the terminal.
c. Remove the RS232 serial cable from the RS232-1 port on the base of the terminal.
Insert this same RS232 serial cable into the RS232 serial port on the contactless
detachable connecting cable (Arm 3).
74
PC-EFTPOS i5100 MERCHANT OPERATING GUIDE
Base of i5100 terminal
Power
RS232-1 RS232-2
Plug
It
CONTACTLESS PAYMENTS