PC-EFTPOS i5100 Operating Manual page 19

• The terminal will NOT revert back to live mode by itself.
• Training mode can only be enabled when there are no reversals or advices
pending.
• In training mode, whole dollar amounts will generate an approved transaction.
Other amounts will result in a 'response code' corresponding to the number of
cents. For example an amount of $2.01 or $0.01 will result in a response code of
01 Declined, Contact Bank.
To start and operate training mode:
TERMINAL DISPLAY
READY
LOGO
hh:mm
PURCHASE
PRESENT CARD
**TRAINING MODE**
Process transactions as per procedures in section 5.0. Receipts will display
**TRAINING ONLY** NOT A VALID TRANSACTION on them.
PC-EFTPOS i5100 MERCHANT OPERATING GUIDE
ACTION
Set the training mode flag on the POS and
initiate a transaction.
dd/mm/yy
Insert the customer's chip card into the chip
$X.XX card reader.
Or:
Swipe the customer's card through the card
reader.
17
PROCEDURES