RST mille
USA
7.1.23 REMOVING
THE
MOLDING
Remove
the
front
(REMOVING THE FRONT FAIRING).
Unscrew and remove the two fastening screws (1).
Tightening torque for screws (1): 2.9 ftlb (4 Nm).
Remove the molding (2) by sliding it out from behind.
7.1.24 REMOVING THE DASHBOARD
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATION).
Remove
the
dashboard
(REMOVING THE FRONT FAIRING).
Unscrew and remove the two screws (2), retrieving the
two bushings and the anti-vibration grommets.
Tightening torque for screws (2): 2.9 ftlb (4 Nm).
WARNING
Replace the grommets if damaged.
Move the dashboard (3) out of the way.
Slip the boot off the connectors (1), and disconnect the
latter from the dashboard (3).
WARNING
When
reassembling,
connectors (1) are fitted together properly.
Remove the dashboard (3).
Release 00/2002 - 03
UPPER
DASHBOARD
fairing
glass,
see 7.1.20
panels,
see 7.1.20
make
sure
the
electrical
2
1
1
2
1
CHASSIS
3
7
- 23 -
00