Multifunction Computer; Legend; Programming Keys; Adjusting The Dashboard Lights - APRILIA RST mille Futura 2001 Service Manual

SCHEDULED MAINTENANCE AND TUNING OPERATIONS

2.3 MULTIFUNCTION COMPUTER

2.3.1 LEGEND

A Left digital display (odometer- mileage counter)
B Right digital multifunction
temperature - coolant temperature – clock/injection
system error codes)
C SET and MODE programming keys.

2.3.2 PROGRAMMING KEYS

WARNING
Do not attempt to program the computer while riding
the motorcycle. This could lead to an upset with
subsequent serious accident, serious injury or even
death.
The operations described below should only be carried
out with the vehicle stopped.
To do so while driving may lead to accidents.
NOTE
All information below refers to operations to be
carried out while the vehicle is shut off.
Within three seconds after turning the ignition key (1) to
position " ", the following dashboard lights will come on:
- all LED warning lights;
- all backlit LEDs;
- all segments of the left display;
- all segments and messages on the right multifunction
display;
This sequence of displays tests the proper operation of
all LEDs, messages, sections and instruments.
After about three seconds have passed, on the
dashboard only the engine oil pressure LED remains
(2) (which will shut off only after the engine is
started), and the following will appear on the display:
- total number of kilometers traveled (3);
- amount of fuel (4);
- coolant temperature (5) [up to 35° C (95° F) the symbol
"---" is displayed];
- hour and minutes (6).

2.3.3 ADJUSTING THE DASHBOARD LIGHTS

You may select from among three different levels of
dashboard light: 100%; 60%; 25%.
To adjust:
Set the light switch (1) to "
Set to " " the light dimmer "
NOTE
Three seconds after the last selection, the SET
key returns to total/trip odometer (mileage counter)
switching mode.
2
- 8 -
00
display (fuel level/air
";
"-" " (2).
RST mille
A
2
1
6
3
1
Release 00/2002 - 03
USA
B
C
4
5
2