RST mille
USA
Replace both rider footrest supports, see 7.1.45
(REMOVING
THE
SUPPORT) and 7.1.46 (REMOVING THE RIGHT
RIDER FOOTREST SUPPORT).
Replace
the
rear
shock
(REMOVING THE SHOCK ABSORBER).
Replace the expansion tank, see 7.1.52 (REMOVING
THE EXPANSION TANK).
Replace the sprocket hub, see 7.4.1 (REMOVING THE
FINAL DRIVE ASSEMBLY).
Replace the rear wheel, see 7.3.1 (REMOVING THE
COMPLETE WHEEL).
Replace the double connecting rod (14) tightening the
nut (15) on the pivot (16).
Tightening torque for nut (16): 36 ftlb (50 Nm).
Replace the shift lever (11) on the serrated gearbox
pivot, making sure that it is properly aligned.
Tighten the screw (12).
Tightening torque for screw (12): 7.2 ftlb (10 Nm).
Replace both lower fairings, see 7.1.33 (REMOVING
THE LOWER FAIRING).
Replace both side fairings, see 7.1.28 (REMOVING
THE SIDE FAIRINGS).
Release 00/2002 - 03
LEFT
RIDER
FOOTREST
absorber,
see 7.10.1
15
11
12
16
14
7
- 95 -
00