QUASAR 125-180
3.2
HEAD UNIT
3.2.1
REMOVING PROTECTION FAN
NOTE
Engine can be left assembled on frame.
"
Remove right footrest, 6.1.7 (REMOVING THE FOOTREST).
"
Loosen and remove the four screws (1- 2).
"
Remove flywheel housing (3)
3.2.2
REMOVING FLYWHEEL UPPER AND LOWER HOUSINGS
NOTE
Engine can be left assembled on frame.
"
Remove flywheel housing, see 3.2.2 (REMOVING FLYWHEEL UPPER
AND LOWER HOUSINGS).
"
Remove
intake
manifold,
MANIFOLD).
"
Loosen and remove screws (1-2).
"
Loosen and remove screw (3).
"
Remove upper (4) and lower (5) housing.
3.2.3
REMOVING THE INTAKE MANIFOLD
NOTE
Engine can be left assembled on frame.
"
Remove carburettor, see 4.3 (REMOVING THE CARBURETTOR).
"
Loosen and remove the two screws (1).
"
Remove the intake manifold (2) and save the O-ring.
NOTE
Change the O-ring at every reassembly.
Release 00/2003 - 09
see
3.2.3
(REMOVING
1
THE
INTAKE
3
4
5
1
ENGINE
3
2
1
2
2
3
- 9 -
00