RST mille
USA
7.1.30 REMOVING THE LEFT AIR DUCT
Carefully read 1.3.9 (PRECAUTIONS AND GENERAL
INFORMATION).
Place the vehicle on the center stand.
Set the ignition switch to "
Remove the side fairing, see 7.1.28 (REMOVING THE
SIDE FAIRINGS).
Remove the headlight complete with half-housings,
see 7.1.22 (REMOVING THE HEADLIGHT).
Disconnect the electrical connector (1) from the air
thermistor.
WARNING
When reassembling, make sure the connector (1) is
fitted properly.
Unscrew and remove the ten screws (2).
Tightening torque for screws (2): 1.4 ftlb (2 Nm).
Unscrew and remove the screw (3), saving the washer.
Tightening torque for screws (3): 7.3 ftlb (10 Nm).
Partially remove the control unit case (4), and retrieve
the bushing if it slips out.
Remove the left air duct (5) from the insert.
Release 00/2002 - 03
".
CHASSIS
5
5
2
3
4
7
2
2
2
2
1
- 27 -
00