CHASSIS
7.1.42 REMOVING THE LICENSE PLATE HOLDER
Carefully read 1.3.9 (PRECAUTIONS AND GENERAL
INFORMATION).
Remove both bag racks, see 7.1.4 (REMOVING THE
BAG RACKS).
Disconnect the license plate lamp connector (1).
WARNING
When reassembling make sure the license plate lamp
connector (1) is properly fitted.
Remove the complete license plate holder (2).
NOTE
Remove the individual components if necessary.
7.1.43 REMOVING THE PASSENGER FOOTREST
SUPPORTS
Carefully read 1.3.9 (PRECAUTIONS AND GENERAL
INFORMATION).
Remove the saddle, see 7.1.1 (REMOVING THE
SADDLE).
Unscrew and remove the two screws (1).
Tightening torque for screws (1): 18 ftlb (25 Nm).
Remove the footrest support (2) complete with footrest.
Also remove the footrest (3) if necessary, see 7.1.47
(REMOVING THE RIDER FOOTREST).
NOTE
If necessary, repeat the above steps to remove
the other passenger footrest support.
7
- 36 -
00
RST mille
1
2
1
2
3
Release 00/2002 - 03
USA
1