RST mille
USA
7.1.26 REMOVING THE FRONT MUDGUARD
Carefully read 1.3.9 (PRECAUTIONS AND GENERAL
INFORMATION).
Place the vehicle on the center stand.
Unscrew and remove the two screws (1).
Tightening torque for screws (1): 3.6 ftlb (5 Nm).
WARNING
Handle all plastic and painted components with care
to avoid scraping or scratching them.
Pull the mudguard (2) out from the front.
7.1.27 REMOVING THE HORN
Place the vehicle on the stand.
Remove the radiator spoiler, see 7.1.35 (REMOVING
THE RADIATOR SPOILER).
Disconnect the two horn connectors (1).
WARNING
When reassembling, make sure the two connectors
(1) are fitted together properly.
To remove the horn (3) complete with bracket, unscrew
and remove the two screws (2)
Tightening torque for screws (2): 18 ftlb (25 Nm).
Release 00/2002 - 03
2
1
2
1
3
CHASSIS
7
- 25 -
00