Body work
Move the front fairing (8) slightly forward.
Disconnect the headlight electrical connector (9).
NOTE
When refitting, make sure the connector (9) is
plugged in properly.
Handle plastic and painted parts carefully, to avoid
scraping or damaging them.
Remove the headlight (REMOVING THE HEAD-
LIGHT).
REMOVING THE HEADLIGHT
Read carefully (PRECAUTIONS AND GENERAL
INFORMATION).
Position the motorcycle on the stand.
Switch the ignition key to the " " position.
Remove the front fairing (REMOVING THE FRONT
FAIRING).
Loosen and remove the screws (1).
Remove the headlight (2).
NOTE
Handle plastic and painted parts carefully,
without scraping or damaging them.
When refitting, make sure the headlight connector (9)
is plugged in properly.
REMOVING THE DASHBOARD
Read carefully (PRECAUTIONS AND GENERAL
INFORMATION).
Remove the front fairing (REMOVING THE FRONT
FAIRING).
Loosen the ring nuts (3) on the odometer cable (4)
and tachometer cable (5).
Withdraw the 2 cables.
Disconnect the dashboard (6) electrical connections.
ch. 7
1
1
5
Release 00
2001-03
8
9
1
2
3
6
4
3
RS 50
7
7-17