SCHEDULED MAINTENANCE AND TUNING OPERATIONS
2.32 FRONT WHEEL
Carefully read 1.3.9 (PRECAUTIONS AND GENERAL
INFORMATION).
Check every 4687 mi (7500 km).
Place the vehicle on the appropriate front support
stand
, see 1.15.1 (PLACING THE VEHICLE ON
THE FRONT SUPPORT STAND).
Spin the wheel in both directions by hand.
Make sure the wheel turns smoothly and without
interference and/or noise. If not, replace the bearings,
see 7.2.2 (DISMANTLING THE WHEEL).
Should you notice any wobble as the wheel spins,
check
the
components
(CHECKING THE COMPONENTS).
If, after repeated spinning, the wheel comes to a stop in
the same position, it must be balanced.
2.33 REAR WHEEL
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATION).
Check every 4687 mi (7500 km).
Place the vehicle on the center stand.
Spin the wheel in both directions by hand.
Make sure the wheel turns smoothly and without
interference and/or noise. If not, replace the bearings,
see 7.2.2 (DISMANTLING THE WHEEL).
Should you notice any wobble as the wheel spins,
check
the
components
(CHECKING THE COMPONENTS).
If, after repeated spinning, the wheel comes to a stop in
the same position, it must be balanced.
2
- 52 -
00
in
question,
see 7.2.3
in
question,
see 7.2.3
RST mille
USA
Release 00/2002 - 03