Removing The Front Direction - APRILIA RST mille Futura 2001 Service Manual

CHASSIS
7.1.28 REMOVING THE SIDE FAIRINGS
WARNING
Wait until the engine and exhaust silencer have
completely cooled down.
Place the vehicle on the center stand.
Unscrew and remove the three inner screws (1).
Tightening torque for screws (1): 3.6 ftlb (5 Nm).
Unscrew and remove the five upper screws (2).
Tightening torque for screws (2): 2.2 ftlb (3 Nm).
Unscrew and remove the four lower screws (3).
Tightening torque for screws (3): 1.4 ftlb (2 Nm).
WARNING
Handle all plastic and painted components with care
to avoid scraping or scratching them.
Remove the side fairing (4).
WARNING
Replace the internal
damaged.
NOTE
If necessary, repeat the above steps to remove
the other side fairing.
7.1.29 REMOVING THE
INDICATORS
If you need to replace the front direction indicator,
proceed by removing
(REMOVING THE MIRRORS).
If you only need to replace the lens (2): - unscrew and
remove the screw (1).
If you need to remove the reflector (1): - follow the
instructions above; - remove the bulb, see 6.15.2
(REPLACING THE FRONT DIRECTION INDICATOR
LAMPS);
- remove the reflector.
7
- 26 -
00
soundproofing panel
FRONT DIRECTION
the mirror, see 7.1.21
3
if
2
RST mille
1
1
1
2
2
4
1
Release 00/2002 - 03
USA