Spare Parts; Specifications - APRILIA RST mille Futura 2001 Service Manual

RST mille
USA

1.10 SPARE PARTS

When making replacements, use only Original aprilia
Spare Parts.
Original aprilia spare parts are high quality, and are
designed and built explicitly for aprilia vehicles.
WARNING
Use of spare parts NOT originally manufactured by
aprilia may cause performance problems and damage.

1.11 SPECIFICATIONS

DIMENSIONS
Max. length
Max. width
Max. height (at front fairing)
Saddle height
Wheelbase
Minimum ground clearance
Weight in riding condition (including fluids and fuel)
ENGINE
Type
Number of cylinders
Total displacement
Max. rated power (to crankshaft)
Max. rated power (to crankshaft)
Max. Torque
Max. Torque
Bore/stroke
Compression ratio
Average piston speed
Camshaft during intake stroke
Camshaft during exhaust stroke
Valve advance (with valve clearance 1 mm)
Intake valve clearance
Exhaust valve clearance
Engine idling rpm
Maximum rpm
Ignition
Starting
Spark advance
Starter motor
Starter motor gear ratio
Clutch
Release 00/2002 - 03
opening during intake stroke
closing during intake stroke
opening during exhaust stroke
closing during exhaust stroke
GENERAL INFORMATION
85.472 in (2,170 mm)
29.133 in (740 mm)
48.818 in (1,240 mm)
32.283 in (820 mm)
56.495 in (1,435 mm)
5.314 in (135 mm)
513.085 lb (235 kg)
60° longitudinal V-type, two-cylinder, 4-stroke, with 4
valves per cylinder, DOHC.
2
60.878 cu in (997.62 cm³)
86.5 kW (118 HP) at 9250 rpm
77 kW (104 HP) at 9250 rpm
96.5 Nm (9.78 kgm) at 7250 rpm
90 Nm (9.17 kgm) at 7000 rpm
97 mm / 67.5 mm
11,8 ± 0,5: 1
22.5 m/s at 10000 rpm
262°, valve lifting = 0.42 in (10.6 mm)
259°, valve lifting = 0.42 in (10.6 mm)
20° before TDC
59° after BDC
64° before TDC
15° after BDC
0.005-0.007 in (0.12-0.17 mm)
0.009-0.011 in (0.23-0.28 mm)
1250 ± 100 rpm
10500 ± 100 rpm
electronically controlled
electric
At start: 5º before TDC. Additional advance automatic,
depending on operating conditions
12 V / 0.9 kW
i= 49/9 * 30/11 * 64/30 = 31.677
multidisc in oil bath with hydraulic control on the left side
of the handlebar and PPC device
- 9 lined discs; 0.14 in (3.5 mm) thick
- 9 plain discs; 0.06 in (1.5 mm) thick
CONT'D ➤
1
- 21 -
00