Specifying The Send Size Of The Image - Sharp MX-3070N User Manual

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE
4
Address Book Address
Scan Size
Auto
AB Inch
X 17
Others
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• It is convenient to use
Tap the [Enter] key
5
After the settings are completed, tap
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:
Tap the [Auto] key.

SPECIFYING THE SEND SIZE OF THE IMAGE

Tap this key to specify the send size as a paper size. If the specified send size is larger than the scan size, the image will
be enlarged. If the specified send size is smaller than the scan size, the image will be reduced.
• The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numeric values.
• The send size cannot be specified when [TIFF-S] is selected for the format in Internet fax mode. (The send size is fixed at
8-1/2" x 11"R (A4R).)
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 5-9)
Tap the [Original] key.
2
Tap the [Send Size] key.
3
Touch to input Address Background Adjustment
Slow Scan Mode
Scan Thin Paper Original
Blank Page Skip
Skip Blank Page in Original
Color Mode
Direct Entry Custom Size
Sharpness
Adjust Outline of Image
( 1~11 5/8 )
11
Y
inch
( 1~11 5/8 )
Preview
inch
Enter
to finely adjust the entered size.
twice.
Specify the original size.
CA
Start
5-46