Scanning Originals; Erasing Peripheral Shadows On The Image(Erase) - Sharp MX-3070N User Manual

SCANNER/INTERNET FAX►Other functions

SCANNING ORIGINALS

ERASING PERIPHERAL SHADOWS ON THE
IMAGE(ERASE)
When scanning thick originals or books, erase any peripheral shadows that may be produced on the image.
This function erases the parts of the image where shadows tend to form, but does not detect shadows and erase only the
shadows.
Scanning a thick book
Shadows appear here
Erase modes
Outer Frame Erase
• This function erases the parts of the image where shadows tend to form, but does not detect shadows and erase only the
shadows.
• If a ratio setting is used in combination with an erase setting, the erase width will change according to the selected ratio.
For example, if you set an erase width of 1/2" (10 mm) and reduce the image to 70% before scanning it, the erase width
will be reduced to 7 mm.
• When the erase setting is selected, the image orientation will be forcibly portrait.
To change the default erase width setting:
In "Setting mode (administrator)", select [System Settings] → [Image Send Settings] → [Operation Settings] → [Condition
Settings] → [Erase Width Adjustment].
The width can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is 1/2" (10 mm). The setting changed here will
apply to [System Settings] → [Copy Settings] → [Condition Setting] → [Erase Width Adjustment] in "Setting mode".
Center Erase
5-85
Not using the erase
function
Shadows appear in the
image.
Edge + Center Erase
Using the erase
function
No shadows appear.
Side Erase