Remote Operation Of The Machine - Sharp MX-3070N User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

REMOTE OPERATION OF THE MACHINE

Remotely operate the machine on your computer.
You can operate the machine from the same panel as the machine's operation panel that is displayed on your PC, with
the same feel as operating in front of the machine.
Operate the machine
using your computer
screen.
The remote operation function can only be used on one computer at a time.
Before you can use the remote operation function, the following preparation is required.
• In "Setting mode", select [System Settings] → [Common Settings] → [Operation Settings] → [Condition Settings] →
[Remote Operation Settings] → [Remote Software Operation] and select [Allow] for [Operational Authority].
• Connect the machine to the network.
• Install a VNC application software (recommended VNC software: RealIVNC) in your computer.
After the preparation is completed, follow the operation described below to set up the function.
Example: RealVNC
1
Check with the administrator of the machine for its IP address.
Follow the prompts on the operation panel of the machine to permit the
2
connection.
When the machine is connected to a VNC application software,
If you wish to disconnect, exit the VNC application software or tap
Use the operation panel in the same way as you would on the machine. However, you cannot enter values in series by
continuously clicking the key.
Your computer
1-47
OPERATION PANEL
Network
Start the VNC viewer, enter the IP
address of the machine in the "Server"
entry box, and click the [OK] button.
appears on the system bar of the machine's touch panel.
.
The machine