BEFORE USING THE MACHINE►PERIPHERAL DEVICES
INNER FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
Replacement the staple cartridge
1
2
3
4
5
Open the finisher front cover.
Gently slide the finisher until it stops.
Lower the staple case release lever
and remove the staple case.
Pull the staple case out to the right.
Remove the empty staple cartridge
from the staple case.
Insert a new staple cartridge into the
staple case as shown.
Push the staple cartridge in until it clicks into place.
Replace the staple case.
Push the staple case in until it clicks into place.
1-98