Use Billing Code - Sharp MX-3070N User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

USE BILLING CODE

If the use of billing code is enabled in "Setting Mode (Administrator", the billing code entry window is displayed at the
time of mode transition (at the time of printing/sending in document filing mode).
Enter the main code or sub code as required.
• To enable use of the billing code
Select "Setting mode (administrator)" → [Billing code setting] → [Administration settings], then set [Use billing code] to
[Enable].
• To retain the specified billing code at the time of mode transition
Select "Setting mode (administrator)" - [Billing code setting] - [Administration settings], then set the [Take over billing code
at mode transition] check box to
You can assign billing codes to reprinting/resending of target files and sending of print jobs from "Setting Mode (Web
version)" - [Document Operations].
Specifying a billing code again
To change the specified billing code to another one, tap the [Switch Billing Code.] key on the action panel.
When the billing code entry window is displayed, select a new billing code.
Select a billing code from the list
Select the desired billing code from the list of registered billing codes.
You need to register billing codes in advance.
REGISTERING A NEW BILLING CODE (page 1-41)
►
1
Billing Code
Please enter Billing Code.
Main Code AAAA
Sub Code AAAA
CA
When not specifying a billing code
Tap the [No Use of Billing Code] key.
To select the previously used billing code (at the time of user authentication)
Tap the [Use Previously-Used Billing Code.] key on the action panel at the time of user authentication; this displays the
main code and sub code the authenticated user has entered previously.
. This eliminates the need to enter billing codes at each mode transition.
Select from List
Select from List
Bypass Billing Code OK
When the billing code entry window is
displayed, tap the [Select from List]
key of the main code.
1-38