Output; Sort/Group Setting - Sharp MX-3070N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

OUTPUT

SORT/GROUP SETTING

This section explains how to select the sorting method when outputting the scanned original.
Auto Together with the image, the stamp content is shifted the amount of the margin width.
Sort Sorts the scanned original on a set basis, and
outputs them.
Group Groups the scanned original on a page basis,
and outputs them.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 2-5)
Tap the [Sort/Group] key.
2
If a finisher or saddle stitch finisher is installed, tap the [Sort/Group] key in [Others].
Select the sorting method.
3
After the settings are completed, tap
• You can select the offset output checkbox
easy removal from the output tray.
• To change the output tray, tap the [Output Tray] key, and select the output destination.
Originals
Originals
.
to have each set of output be offset from the previous set to enable
2-41
Finished
When 5 is set for the
number of copies
When 5 is set for the
number of copies
Finished